No products in the cart.
₹0.00
Cart
Fast
Most prints in
less than 2 hours
Versatile
Advanced materials
for any application
Intuitive
Learn in
15 minutes
Reliable
Unmatched print
success rate
Accurate
Rivals injection
molded parts
Get more done with most prints in under 2 hours 1
1. Prepare
Go from CAD to printing in minutes with just a few clicks using our free PreForm software.
2. Print
Monitor your prints and manage your printers from anywhere with an integrated camera, printer diagnostic tools, and our free Dashboard software.
3. Post-Process
Easy, effective post-processing in just fifteen minutes with quick- release Build Platform Flex, Form Wash, and Form Cure.
4. Finish
Use finished parts as they are or opt to sand, paint, coat, or electroplate them.
1 Typical print time using 80th percentile print height (53mm), 100 μm layer height, and any material
Tackle any problem with our industry- leading materials, or explore more possibilities with Open Platform.
Leverage materials optimized for impact resistance, rigidity, flame retardancy, flexibility, and more.
Non-acrylate chemistries like true silicone, ceramic, and polyurethane materials.
Certified third-party materials and open license available.
Produce stunning parts that always fit with a surface finish that rivals injection molding.
Sharpest features with 50 μm minimum feature size for razor-sharp detail.
Smoothest surfaces with 50 μm pixel size and advanced pixel smoothing for sub pixel resolution.
Accurate assemblies with tight tolerances so your parts always fit.
Wash (2nd Gen)
Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, the Form Wash automatically raises parts out of the IPA so they can air dry.
Connect With A Formlabs Expert
