₹0.00
Cart

No products in the cart.

Form Wash + Form Cure

Stronger Parts, Less Effort

Form Wash automates the print washing process for consistent, thorough, no-mess cleaning. Parts can be transferred directly from the printer to Form Wash, still on the build platform, or removed and placed in the basket. Form Cure provides a reliable, professional post-curing solution, precisely controlling temperature and light to cure 3D printed parts to their optimal performance properties.

Automate Cleaning with Form Wash

Parts travel straight from the Form 3 or Form 2 to Form Wash. Opt to go glove-free and keep parts directly on the build platform.

CONSISTENTLY CLEAN

Form Wash’s impeller agitates isopropyl alcohol (IPA) to flow around your parts & getting them perfectly clean–every time.

BUILT TO FIT THE BUILD PLATFORM

Parts travel straight from the Form 3/Form 3L to Form Wash and can stay right on the build platform or be removed and placed in the basket.

AUTOMATED WASH CYCLE

Manual washing requires careful attention and parts left for longer period in IPA can warp. When washing process ends, Form Wash automatically raises parts out of IPA & are air dry.

IPA MONITORING

Form Wash can hold up to 8.6 liters of IPA, enough to wash approximately 70 prints. An included hydrometer lets you know when it’s time to change out IPA. A siphon pump makes it easy to transfer IPA into and out of the wash bucket.

Set it and Forget it

Simply set the appropriate time and let Form Wash get to work.

15
MINUTES

Approximate wash time when using fresh isopropyl alcohol (IPA)

8.6
LITERS

IPA volume for removable wash bucket

70
PRINTS

Amount of prints per IPA refill in regular use

ADVANCED HEATING

Precise temperature control, Form Cure’s chamber heats up to 80 °C.

BALANCED LIGHT 13

LEDs emit 405 nm light to trigger the post-curing reaction, working with the heater to post-cure parts.

UNIFORM EXPOSURE:

A rotating turntable, forced-air heating, and multi-directional LEDs uniformly post-cure parts.

A Consistent, Automated Workflow

Once washing completes, Form Wash
automatically lifts parts out of the IPA,
avoiding over-soaked, warped prints. Parts
air dry and are ready when you are.

Form Cure

Maximize Material Properties with Form Cure

Form Cure provides a reliable, professional post-curing solution, precisely controlling temperature and light to cure 3D printed parts to their optimal performance properties.

Included with Form Wash

HYDROMETER

A custom hydrometer tool to
check IPA saturation.

STORAGE

Behind the wash bucket to
keep finishing tools tidy.

SIPHON PUMP

Easy IPA transfer into and
out of the wash bucket.

While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean.

Unlock Peak Performance

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

80
DEGREES CELSIUS

An advanced heating system precisely controls curing temperatures up to 80 °C

405
NANOMETERS

13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials

1
REVOLUTION PER MINUTE

A rotating turntable provides uniform exposure during post-curing

Unlock Peak Performance

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

80
DEGREES CELSIUS

An advanced heating system precisely controls curing temperatures up to 80 °C

405
NANOMETERS

13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials

1
REVOLUTION PER MINUTE

A rotating turntable provides uniform exposure during post-curing

Designed to Maximize Material Properties

For Standard Resins, simply use Form Cure’s default time and temperature.
For all other materials, use unique recommended settings for optimum performance.

Connect With A Formlabs Expert





    Request A FREE Sample Part: